Menu:

Produção do Corpo Docente

Capítulos de livros publicados


Número total de itens: 96

2025

1.   Garcia, Andressa Caroline Rodrigues ; Mezarina, Juan Antonio Flores ; CERÓN-MUÑOZ, HERNÁN DARÍO. Aeroacoustics Effects of the Wavy Leading Edge on a Fan-Rig SDT Stators. Lecture Notes in Mechanical Engineering. 01ed. Em: . : Springer Nature Switzerland. 2025.p. 155-165.

2024

1.   BERMUDEZ, G. ; PEDRO, G. D. G. ; MEDEIROS, V. S. ; BOAVENTURA, T.. Comparative Analyses of ROS Local Planners for Quadrupedal Locomotion: A Study in Real and Simulated Environments. Lecture Notes in Networks and Systems. 1ed. Em: . : Springer Nature Switzerland. 2024.p. 294-303.
2.   da Silva, Alessandro Márcio Hakme ; do Prado, Giovani Biteli ; Fortulan, Carlos Alberto ; Sabino, Luis Gustavo ; Baptista, Alessandra ; de Carvalho, Jonas. Analysis of Low Cost 3D Printer Process Parameters and Their Influence on Manufacturing Functionality of Printed Parts. IFMBE Proceedings. 1ed. Em: . : Springer Nature Switzerland. 2024.p. 158-165.
3.   de Oliveira, Tarcísio Ladeia ; JASINEVICIUS, RENATO GOULART ; de Carvalho, Jonas ; RODRIGUES, ALESSANDRO ROGER. Numerical Optimization of Cutting Parameters for Texturization of Dental Implants. Em: Déborah de Oliveira, Maksym Ziberov, Alisson Rocha Machado. (Org.). Lecture Notes in Mechanical Engineering. 1eded. : Springer Nature Switzerland. 2024.p. 218-230.
4.   Medeiros, Vivian S. ; ESCALANTE, FELIX M. ; Becker, Marcelo ; Boaventura, Thiago. Impedance Control Analysis for Legged Locomotion in Oscillating Ground. Lecture Notes in Networks and Systems. 1ed. Em: . : Springer Nature Switzerland. 2024.v. 811, p. 197-208.
5.   MOSCONI, DENIS ; MORENO, YECID ; SIQUEIRA, ADRIANO. Human-Exoskeleton Interaction During Knee Flexion-Extension Under Different Configurations of Robot Assistance-Resistance. Em: Ebrahim Samer El Youssef; Mohammad Osman Tokhi; Manuel F. Silva; Leonardo Mejia Rincon. (Org.). Lecture Notes in Networks and Systems. 1ed.Cham, Switzerland. : Springer Nature Switzerland. 2024.v. 2, p. 336-344.
6.   Nascimento, E.O. ; HERNANDEZ MESA, RICHARD SAMIR ; Cabezas-Gómez, L. ; BANDARRA FILHO, E. P.. NANOFLUIDOS DE AL2O3 EM TROCADORES DE CALOR: UMA BREVE REVISÃO BIBLIOGRÁFICA E ANÁLISE NUMÉRICA DE ESTUDO DE CASOS. Em: Fernanda Beatriz; Larissa; Amanda; Felipe; Josenilton; Júlia; Leonardo; Marcus Vinícius; Ophir Valiante; Paulo César; Raimundo Vicente; Stanley Washington; Gilmar. (Org.). 32º Simpósio da Pós-Graduação em Engenharia Mecânica. 1ed.Uberlândia. : Even3 Publicações. 2024.v. 32, p. 227-230.
7.   Pedro, Gabriel Duarte Gonçalves ; Cunha, Thiago Boaventura ; Júnior, Pedro Américo Almeida Magalhães ; Freitas, Gustavo Medeiros. Planar Motion Control of a Quadruped Robot. Lecture Notes in Networks and Systems. 1ed. Em: . : Springer Nature Switzerland. 2024.v. 811, p. 171-184.
8.   SIQUEIRA, A. A. G.; SIQUEIRA, A. A. G. ; PEREIRA, D. C. M.. Development of a Flexible Algorithm for Simulations with Human-Exoskeleton Models: An Approach to the Robot-Assisted Therapy. IFMBE Proceedings. 1ed. Em: . : Springer Nature Switzerland. 2024.p. 299-309.
9.   VELASQUEZ, A. E. B. ; HIGUTI, V. A. H. ; GASPARINO, M. V. ; BONACINI, L. ; MAGALHAES, D. V. ; Becker, Marcelo ; MILORI, D. M. B. P.. Mirã 2.0 Plataforma Robótica Agrícola para monitoramento das condições do solo em culturas de soja no Brasil. Em: Luís Henrique Bassoi ; Alberto Carlos de Campos Bernardi ; Carlos Manoel Pedro Vaz João Leonardo Fernandes Pires; Luciano Gebler ; Lúcio André de Castro Jorge ; Ricardo Yassushi Inamasu. (Org.). Agricultura de Precisão:. 1ed. : Editora Cubo. 2024.p. 103-112.

2023

1.   ANJOS, L. F. ; PALMA, A. J. ; BUSCAGLIA, G. C. ; Nicoletti, R.. Parametric Analysis of Journal Bearings with Chevron Textures on the Shaft Surface. Em: Chu, F., Qin, Z.. (Org.). Mechanisms and Machine Science, vol 139. 1ed.Cham. : Springer International Publishing. 2023.v. 1, p. 201-210.
2.   ERBERELI, R. ; Camargo IL ; MARCONDES, C. R. ; TULLIO, R. R. ; FORTULAN, C. A. ; ROLLO, J.M.D.A.. Characterization of the Bones of Different Bovine Breeds Based on the Microarchitecture of the Bone Tissue. Proceedings of the 8th Brazilian Technology Symposium (BTSym?22): Emerging Trends and Challenges in Technology. 1ed.Switzerland. Em: . : Springer. 2023.p. 382-390.
3.   Fernando M. Catalano; ANDRICOPULO, A. ; BERNDT, A. ; CARVALHO, A. C. P. L. F. ; WENDLAND, E. C. ; OLIVA, G. ; TUNDISI, J. G. ; BONAGAMBA, T. J. ; BAGNATO, V. S.. Visão Geral do Impacto Ambiental da Aviação. Em: SECRETARIA MUNICIPAL DE CIÊNCIA, TECNOLOGIA E INOVAÇÃO. (Org.). CIÊNCIA, TECNOLOGIA, INOVAÇÃO E O FUTURO DE SÃO CARLOS. 1ed.São Carlos SP. : Fundação Pró-Memória de São Carlos-Sp. 2023.v. 1, p. 106-121.
4.   GOMES, M. C. ; SILVA, M. B. ; HUNG, W. N. P. ; COELHO, R. T.. Home ABCM Series on Mechanical Sciences and Engineering Conference paper Experimental Study of Micromilling of H13 Tool Steel Manufactured by Directed Energy Deposition. Em: Déborah de Oliveira; Maksym Ziberov; Alisson Rocha Machado. (Org.). ABCM Series on Mechanical Sciences and Engineering. 1ed.Nova York. : Springer Cham. 2023.p. 1-232.
5.   LADEIA DE OLIVEIRA, TARCÍSIO ; JASINEVICIUS, R. G. ; CARVALHO, J. ; RODRIGUES, A. R.. Numerical Optimization of Cutting Parameters for Texturization of Dental Implants. Em: Déborah de Oliveira; Maksym Ziberov; Alisson Rocha Machado. (Org.). ABCM Series on Mechanical Sciences and Engineering. 1ed. : Springer Cham. 2023.p. 218-230.
6.   MOURA MARTINS, AUGUSTO ; Oliveira, A. M. W. ; Abrão, A.M. ; VENTURA, C. E. H.. The influence of edge preparation on the performance of ceramic inserts applied to hard turning. Em: de Oliveira, D.; Ziberov, M.; Rocha Machado, A.. (Org.). ABCM Series on Mechanical Sciences and Engineering - COBEF 2023. 1ed.Cham. : Springer. 2023.p. 190-200.
7.   NUNES, P. F. ; PEREIRA, D. C. M. ; OSTAN, I. ; SIQUEIRA, A. A. G. ; SIQUEIRA, A. A. G.. Control Design Inspired by Motors Primitives to Coordinate the Functioning of an Active Knee Orthosis for Robotic Rehabilitation. Em: Bastos-Filho, T.F.; de Oliveira Caldeira, E.M.; Frizera-Neto, A.. (Org.). Control Design Inspired by Motors Primitives to Coordinate the Functioning of an Active Knee Orthosis for Robotic Rehabilitation. 1ed.São Paulo. : Springer. 2023.v. 83, p. 1-6.
8.   PARRA, HECTOR G. ; GAONA, ELVIS E. ; Ceron, Hernán D.. Experimental Analysis of a Peregrine Falcon 3D Prototype with Oscillating Feathers. Communications in Computer and Information Science. 01ed. Em: . : Springer Nature Switzerland. 2023.p. 58-69.
9.   PEREIRA, D. C. M. ; LUIZETE, C. E. ; SIQUEIRA, A. A. G. ; SIQUEIRA, A. A. G.. DIRECT COLLOCATION METHOD FOR SOLVING OPTIMAL CONTROL PROBLEMS. Em: Leonardo de Carvalho Vidal; Nilmara Almeida Guimarães; Juliana Ribas Monteiro; Maxmiller Silva Laviola. (Org.). ENGENHARIAS - AUTOMAÇÃO, ROBÓTICA, METROLOGIA E ENERGIA: ESTUDOS E TENDÊNCIAS. 1ed. 2023.v. 1, p. 246-264.
10.   PEREIRA, D. C. M. ; NUNES, P. F. ; SIQUEIRA, A. A. G. ; SIQUEIRA, A. A. G.. Modeling and Simulation of a Fuzzy-Based Human Control Using an Interaction Model Between Human and Active Knee Orthosis. Em: Bastos-Filho, T.F.; de Oliveira Caldeira, E.M.; Frizera-Neto, A.. (Org.). XXVII Brazilian Congress on Biomedical Engineering. CBEB 2020. IFMBE Proceedings. 2ed. 2023.p. 1.
11.   RIBEIRO, GEOVANA ELOIZI ; DIAZ, V. E. W. ; VALICELLI SANITÁ, WILLIAN ; RODRIGUES, A. R. ; COELHO, R. T.. Effect of Laser Power and Powder Morphology on Surface Roughness of TI6Al4V Produced by Laser Powder-Directed Energy Deposition. Em: Déborah de Oliveira; Maksym Ziberov; Alisson Rocha Machado. (Org.). https://link.springer.com/book/10.1007/978-3-031-43555-3. 1ed.New York, EUA. : Springer Cham. 2023.p. 151-160.
12.   RICCI, V. P. ; RODRIGUES, P. H. S. ; XAVIER, G. L. A. ; HASSUI, A. ; VENTURA, C. E. H.. Influence of cutting speed on chip formation and hardening in the deep-hole drilling process of VTM-PLUS tool steel. Em: de Oliveira, D.; Ziberov, M.; Rocha Machado, A.. (Org.). ABCM Series on Mechanical Sciences and Engineering - COBEF 2023. 1ed.Cham. : Springer. 2023.p. 95-104.
13.   DA SILVA, MAÍRA MARTINS ; Barbosa, Arthur Silva ; DE OLIVEIRA, LEOPOLDO PISANELLI RODRIGUES. Dynamic Model of a Macro Fiber Composite-Actuated Bio-inspired Robotic System. Mechanisms and Machine Science. 1ed. Em: IFToMM WC 2023. (Org.). Advances in Mechanism and Machine Science. 1ed.Ramanujan. : Springer Nature Switzerland. 2023.v. 1, p. 1-10.

2022

1.   BOAVENTURA, T.; SEMINI, C.. Hydraulic Actuation. Em: Ang, Marcelo H; Khatib, Oussama; Siciliano, Bruno. (Org.). Encyclopedia of Robotics. 1ed.Berlin, Heidelberg. : Springer Berlin Heidelberg. 2022.p. 1-10.
2.   FERREIRA, S. S. ; SANTOS, F. N. Q. ; TIBIRIÇÁ, C. B.. Thermal Resistance Model of a Polymeric Pulsating Heat Pipe. Em: Marcio Ferreira Martins; Rogério Ramos; Humberto Belich. (Org.). Multiphase Flow Dynamics. 1ed. : Springer. 2022.p. 165-174.
3.   LIMA, T. G. S. ; NASCIMENTO, F. J. ; RODRIGUEZ, O.M.H. ; RAMOS, R.. Evaluation of Multiphase Flow Pattern and Friction Loss Prediction Models Applied to NEMOG?s Multiphase Flow Circuit. Em: Marcio Ferreira Martins; Rogério Ramos; Humberto Belich. (Org.). Multiphase Flow Dynamics - A perspective from the Brazilian Academy and Industry. 1ed.Gewerbestrasse. : Springer Nature. 2022.v. 1, p. 245-254.
4.   LOPES JUNIOR, G. B. ; BOCK, E.G.P. ; Cabezas-Gómez, L.. Qualitative Hemolysis Analyses in VAD by Stress Distribution Using Computational Hemodynamics. Em: Bastos-Filho, T.F.; de Oliveira Caldeira, E.M.; Frizera-Neto, A.. (Org.). XXVII Brazilian Congress on Biomedical Engineering, CBEB 2020. 1ed.Switzerland AG. : Springer, Cham. 2022.v. 83, p. 227-232.
5.   PEREIRA, D. C. M. ; MOREIRA, M. M. A. C. ; SIQUEIRA, A. A. G. ; SIQUEIRA, A. A. G.. HUMAN-EXOSKELETON COMPUTATIONAL MODEL: AN APPROACH TO THE HUMAN-MACHINE INTERACTION PROBLEM IN ROBOTIC ASSISTED THERAPY. Em: Julianno Pizzano Ayoub; Marcel Ricardo Nogueira de Oliveira. (Org.). ENGENHARIAS MECÂNICA E INDUSTRIAL: TECNOLOGIAS E TENDÊNCIAS EM PESQUISA. 1ed.São Paulo. : Editora Científica Digital. 2022.v. 1, p. 87-99.
6.   RODRIGUEZ, O.M.H.; QUINTINO, A. M. ; HERNANDEZ-CELY, M. M. ; NASCIMENTO, F. J.. State-of-the-Art Instrumentation and Experimental Methods Developed at the Industrial Multiphase Flow Laboratory over the Last 17 Years: From Gamma-Ray and Wire-Mesh Tomography to Physics-Informed Machine Learning. Em: Marcio Ferreira Martins; Rogério Ramos; Humberto Belich. (Org.). Multiphase Flow Dynamics - A Perspective from the Brazilian Academy and Industry. 1ed.Gewerbesrasse. : Suíça. 2022.v. 1, p. 63-86.
7.   SENNI, A. P. ; ARGOTE PEDRAZA, INGRID LORENA ; BONACINI, L. ; TRONCO, M. L.. DETECÇÃO DE ÁREA NAVEGÁVEL EM AMBIENTES AGRÍCOLAS USANDO VISÃO COMPUTACIONAL E PMC PARA IMPLEMENTAÇÃO EM ARQUITETURA PIPELINE. DETECÇÃO DE ÁREA NAVEGÁVEL EM AMBIENTES AGRÍCOLAS USANDO VISÃO COMPUTACIONAL E PMC PARA IMPLEMENTAÇÃO EM ARQUITETURA PIPELINE. 1ed. Em: . 2022.p. 236-245.
8.   SILVEIRA, Z. C. Test Problem: Case Study ? Design for Customization of na Assistive Device for Daily Activities. Em: Manupati, V.K.; Putnik, G.D.; Varella, M.L.R.. (Org.). Smart and Sustainable Manufactruing Systems for Industry 4.0.. 1a.ed.New York. : CRC Press - Taylor & Francis. 2022.p. 193-235.
9.   SILVEIRA, Z. C. Open Design Concepts (Complementary Text for Chapter 1). Em: Manupati, V.K.; Putnik, G.D.; Varella, M.L.R.. (Org.). Smart and Sustainable Manufactruing Systems for Industry 4.0. 1ed.New York. : CRC Press - Taylor & Francis. 2022.p. 237-250.
10.   SOARES JUNIOR, C. ; AGUIAR, P. R. ; CONCEICAO JUNIOR, P. O. ; GOTZ, R. ; MONSON, P. M. C. ; RODRIGUES, A. R.. Study on a Novel Impact Test for SHM of CFRP Based on Screwdriver Bit Launch and Electret Microphone. Advances in System-Integrated Intelligence. SYSINT 2022.. 1ed. Em: . : Springer. 2022.v. 546, p. 379-386.
11.   ZAMPERETI, L. O. ; QUINTINO, A. M. ; RODRIGUEZ, O.M.H.. Data-driven machine learning applied to liquid-liquid flow pattern prediction. Em: Marcio Ferreira Martins; Rogério Ramos; Humberto Belich. (Org.). Multiphase Flow Dynamics: A Perspective from the Brazilian Academy and Industry. 1ed.Gewerbesrasse. : Suíça. 2022.v. 1, p. 123-129.

2021

1.   Caracik, Vinicius Birindelli ; Macedo, João Paulo ; BIDINOTTO, Jorge Henrique. Flydubai 981: An Analysis of the Accident Through the Quantitative Loss of Control Criteria. Smart Innovation, Systems and Technologies. 6ed. Em: . : Springer International Publishing. 2021.p. 759-765.
2.   Da Silva, J. D. ; MOREIRA, D. C. ; RIBATSKI, G.. An overview on the role of wettability and wickability as a tool for enhancing pool boiling heat transfer. Em: John Patrick Abraham; John M. Gorman; Wolodmyr Minkowycz. (Org.). Advances in Heat Transfer. 1ed. 2021.v. 53, p. 187-248.
3.   de Camargo, Italo Leite ; ERBERELI, ROGÉRIO ; LOVO, JOÃO FIORE PARREIRA ; Fortulan, Carlos Alberto. DLP 3D Printer with Innovative Recoating System. Smart Innovation, Systems and Technologies. 1ed. Em: . : Springer International Publishing. 2021.p. 609-616.
4.   Di Marzo, Marcela ; Bidinotto, Jorge ; Scarpari, José. Pilot¿s Visual Eye-Track and Biological Signals: Can Computational Vision Toolbox Help to Predict the Human Behavior on a Flight Test Campaign?. Advances in Intelligent Systems and Computing. IVed. Em: . : Springer International Publishing. 2021.p. 232-238.
5.   LOPES JUNIOR, G. B. ; Cabezas-Gómez, Luben ; Lobosco, R.J.. Computational Hemodynamics. Em: Bock, E.G.P.. (Org.). Bioengineering and Biomaterials in Ventricular Assist Devices. 1ed.Boca Raton. : CRC Press. 2021.p. 179-203.
6.   Maki, L. H. ; Paredes, M. S. V. ; VAROTO, P. S.. Dynamic Performance and Uncertainty Analysis of a Piezometaelastic Structure for Vibration Control and Energy Harvesting. Em: Epp, D.S.. (Org.). Special Topics in Structural Dynamics & Experimental Techniques, Volume 5. Conference Proceedings of the Society for Experimental Mechanics Series. 1ed. 2021.v. 5, p. 1-10.
7.   MARTÍNEZ, ANDRÉS G. ; HIMENO, FERNANDO H. T. ; MATHIAS, M. S. ; MEDEIROS, MARCELLO A. F.. On Subharmonic Resonance and Other Nonlinear Mechanisms in Wavepackets in Boundary Layers. Em: Sherwin S.; Schmid P.; Wu X.. (Org.). IUTAM Laminar-Turbulent Transition. IUTAM Bookseries. 1ed. : Springer. 2021.v. 38, p. 97-105.
8.   Varoto, P. S.; Bonisoli, E. ; Lisitano, D.. Parametric Analysis and Voltage Generation Performance of a Multi-directional MDOF Piezoelastic Vibration Energy Harvester. Em: Walber, C., Walter, P., Seidlitz, S.. (Org.). Sensors and Instrumentation, Aircraft/Aerospace, Energy Harvesting & Dynamic Environments Testing. 1ed. 2021.v. 7, p. 1-10.

2020

1.   Cárdenas R., César A. ; Grisales, Víctor Hugo ; Collazos Morales, Carlos Andrés ; CERÓN-MUÑOZ, H. D. ; Ariza-Colpas, Paola ; Caputo-Llanos, Roger. Quadrotor Modeling and a PID Control Approach. Lecture Notes in Computer Science. 1ed. Em: . : Springer International Publishing. 2020.p. 281-291.
2.   ERBERELI, R. ; DE CAMARGO, ITALO ; LOVO, JOÃO ; Fortulan CA ; ROLLO, J.M.D.A.. Potencialidade Bactericida Do Aço Inoxidável Martensítico 17-4 PH. Ciências Tecnológicas, Exatas e da Terra e seu Alto Grau de Aplicabilidade. 1ed.São Paulo. Em: . : Editora Atena. 2020.p. 160-170.
3.   LAHR, G. J. G. ; MARAO, L. A. ; GARCIA, H. B. ; BOAVENTURA, T. ; CAURIN, G. A. P.. Genetic Approach for Coupled Dynamics Optimization in a Multiple Degree-of-Freedom System. ISR 2020; 52th International Symposium on Robotics. 1ed. Em: . 2020.p. 1-7.
4.   Porto, Heitor Andrade ; Porto, Arthur José Vieira ; Fortulan, Carlos Alberto. PROPOSAL OF A CONCEPT FOR MODELING SMALL WIND TURBINES. Ampliação e Aprofundamento de Conhecimentos nas Áreas das Engenharias 3. 1ed. Em: . : Atena Editora. 2020.p. 1-13.
5.   TOLEDO, L. V. O. ; Lahr, Gustavo Jose Giardini ; CAURIN, G. A. P.. In-Hand Manipulation via Deep Reinforcement Learning for Industrial Robots. Em: Pucheta M., Cardona A., Preidikman S., Hecker R.. (Org.). Multibody Mechatronic Systems. MuSMe 2021. Mechanisms and Machine Science. 1ed. 2020.v. 94, p. 1.
6.   VAROTO, P. S. Issues in Laboratory Simulation of Field Vibration Data: Experimental Results on a Typical Structure. Em: Walber, C., Walter, P., Seidlitz, S.. (Org.). Sensors and Instrumentation, Aircraft/Aerospace, Energy Harvesting & Dynamic Environments Testing, Volume 7. Conference Proceedings of the Society for Experimental Mechanics Series. 1ed. 2020.v. 7, p. 347-354.

2019

1.   da Silva, Heitor Antonio Pereira ; Nicoletti, Rodrigo. Stochastic Analysis of Asymmetric Tilting-Pad Journal Bearings. Em: K. L. Cavalca; H. I. Weber. (Org.). Mechanisms and Machine Science. 1ed. : Springer International Publishing. 2019.v. 60, p. 252-263.
2.   DOS SANTOS, WILIAN M. ; Siqueira, Adriano A. G. ; SIQUEIRA, A. A. G.. Design and Control of a Transparent Lower Limb Exoskeleton. Em: Carrozza M.; Micera S.; Pons J.. (Org.). Biosystems & Biorobotics. 1ed. : Springer International Publishing. 2019.v. 22, p. 175-179.
3.   Faria Conde, Fabio ; Cavalcanti Pinto, Haroldo ; Masoumi, Mohammad ; Arnaldo Avila, Julian. Effect of Textures and Microstructures on the Occurrence of Delamination during and after Fracture Toughness Tests of API X80 Steel Plates. Strength of Materials [Working Title]. 1ed. Em: . : IntechOpen. 2019.p. 1-26.
4.   Ito, L. R. ; Ramos, D. J. ; Silveira, Z. de C. ; DANIEL, G. B.. Parametric Sensitivity Analysis of Tilting Pad Bearings to Investigate the Dynamic Behavior of Rotating Machines. Em: Cavalca, K.L; Weber, H.I.. (Org.). Mechanisms and Machine Science. 1ed.Springer, Cham. : Springer International Publishing. 2019.v. 60, p. 292-306.
5.   Pedraza, Ingrid Lorena Argote ; Diaz, John Faber Archila ; Pinto, Renan Moreira ; Becker, Marcelo ; Tronco, Mario Luiz. Sweet Citrus Fruit Detection in Thermal Images Using Fuzzy Image Processing. Communications in Computer and Information Science. 1ed. Em: . : Springer International Publishing. 2019.p. 182-193.
6.   Spada, Raphael P. ; Nicoletti, Rodrigo. Applying Compressed Sensing to Blade Tip Timing Data: A Parametric Analysis. Mechanisms and Machine Science. 1ed. Em: . : Springer International Publishing. 2019.v. 62, p. 121-134.
7.   Varoto, Paulo S. Dynamic Behavior and Performance Analysis of Piezoelastic Energy Harvesters Under Model and Parameter Uncertainties. Conference Proceedings of the Society for Experimental Mechanics Series. 1ed. Em: . : Springer International Publishing. 2019.p. 57-66.

2018

1.   ALVAREZ-BRICENO, R. ; de Oliveira, L.P.R. ; KANIZAWA, F. ; G. Ribatski. Flow Induced Vibrations in Tube Bundles under Crossflow. Encyclopedia of Two-Phase Heat Transfer and Flow III: Macro and Micro Flow Boiling and Numerical Modeling Fundamentals. 1ed. Em: . : World Scientific Publishing Co Pte Ltd. 2018.v. 4, p. 301-398.
2.   Araujo, Luis A.O. ; FOSCHINI, CESAR R. ; FORTULAN, CARLOS A.. Piezoelectric energy harvesting device based on quartz as a power generator. Magnetic, Ferroelectric, and Multiferroic Metal Oxides. 01ed. Em: . : Elsevier. 2018.p. 265-274.
3.   Colombo, Fernanda Thaís ; DA SILVA, MAÍRA MARTINS. Towards a Servovision Based Control for a Planar Parallel Manipulator. Em: Carvalho, J.C.M., Martins, D., Simoni, R., Simas, H.. (Org.). Mechanisms and Machine Science. 1ed. : Springer International Publishing. 2018.p. 244-253.
4.   de Carvalho Fontes, João Vitor ; DA SILVA, MAÍRA MARTINS. Simulation and Experimental Verification of a Global Redundancy Resolution for a 3PRRR Prototype. Em: Carvalho, J.C.M., Martins, D., Simoni, R., Simas, H.. (Org.). Mechanisms and Machine Science. 1ed. : Springer International Publishing. 2018.p. 315-324.
5.   Fontes, Joao Vitor C. ; Vieira, Hiparco L. ; da Silva, Maíra M.. The Impact of Kinematic Redundancies on the Conditioning of a Planar Parallel Manipulator. Em: Carvalho, J.C.M., Martins, D., Simoni, R., Simas, H.. (Org.). Mechanisms and Machine Science. 1ed. : Springer International Publishing. 2018.p. 449-456.
6.   GARCIA, HENRIQUE B. ; Luna, Leonardo S. ; Lahr, Gustavo Jose Giardini ; CAURIN, GLAUCO A. P.. ILQG Planner Applied to Dynamic Systems with Intermittent Contact. Mechanisms and Machine Science. 1ed. Em: . : Springer International Publishing. 2018.p. 335-343.
7.   Tibiriçá, Cristiano Bigonha; Ribatski, Gherhardt. Flow Boiling and Two-Phase Flows in Single Microchannels and Microchannel Heat Sinks: Fundamentals, Differences, and New Areas for Research. Em: John R. Thome. (Org.). Encyclopedia of Two-Phase Heat Transfer and Flow IV. 1ed. 2018.v. 3, p. 185-231.
8.   TONATTO, M. L. P. ; ROESE, P. B. ; TITA, V. ; FORTE, M. M. C. ; AMICO, S. C.. Offloading marine hoses: computational and experimental analyses. Em: John Summerscales Jasper Graham-Jones Richard Pemberton. (Org.). Marine Composites: Design and Performance. 1ed.New York. : Woodhead Publishing - Elsevier. 2018.v. 1, p. 389-416.
9.   Vieira, Hiparco Lins ; de Carvalho Fontes, João Vitor ; Beck, Andre Teófilo ; DA SILVA, MAÍRA MARTINS. Robust Critical Inverse Condition Number for a 3RRR Robot Using Failure Maps. Em: Zeghloul, Saïd, Romdhane, Lotfi, Laribi, Med Amine. (Org.). Mechanisms and Machine Science. 1ed. : Springer International Publishing. 2018.p. 285-294.

2017

1.   ALVAREZ, R. P. ; De Oliveira, L.P.R. ; KANIZAWA, F. T. ; RIBATSKI, G. Flow Induced Vibrations in Tube Bundles under Crossflow. Em: John R. Thome. (Org.). Encyclopedia of Two-Phase Heat Transfer and Flow III. 1ed.Cingapura. : World Scientific Publishing. 2017.v. 4, p. 1.
2.   Archila-Diaz, J. F. ; ARGOTE-PEDRAZA, I. L. ; Bortholin, R. ; RUBIN, R. ; Archila-Diaz, J. N. ; TRONCO, M. L.. Robotic kinematics applied to human biomechanics. IFMBE Proceedings. 1ed. Em: . : Springer Singapore. 2017.p. 345-348.
3.   Boaventura, Thiago; Hammer, Lisa ; Buchli, Jonas. Interaction Force Estimation for Transparency Control on Wearable Robots Using a Kalman Filter. Biosystems & Biorobotics. 1ed.Cham. Em: . : Springer International Publishing. 2017.p. 489-493.
4.   BUCHLI, J. ; BOAVENTURA, T.. Impedance Control for Bioinspired Robots. Em: Maziar A. Sharbafi; André Seyfarth. (Org.). Bioinspired Legged Locomotion: Models, Concepts, Control and Applications. 1ed.Oxford. : Butterworth-Heinemann. 2017.p. 223-238.
5.   COSTA, R.R.C. ; VIEIRA, A.C. ; GUEDES, R. M. ; TITA, V.. A biopolymer derived from castor oil polyurethane: experimental and numerical analyses. Em: Vijay Kumar Thakur; Manju Kumari Thakur; Michael R. Kessler. (Org.). Handbook of Composites from Renewable Materials, Volume 3, Physico-Chemical and Mechanical Characterization. 1ed.Nova Jersey. : Wiley. 2017.v. 3, p. 1-30.
6.   MEDEIROS, R. ; SANTANA, H. B. ; RODRIGUEZ-RAMOS, REINALDO ; CASTILLERO, J. B. ; DIAZ, R. G. ; TITA, V.. Modeling of Smart Piezoelectric Sensors: Determining Effective Properties with Interfacial Bonding Conditions. Em: André Ferreira Costa Vieira. (Org.). Material Modelling: Applications, Challenges and Research. 1ed.Nova Iorque. : Nova Science Publishers. 2017.v. 1, p. 1-48.
7.   RIBEIRO, M. L. Progressive Failure Analysis of Composite Laminates Using Carrera´s Unified Formulation (CUF). Material Modelling: Applications, Challenges and Research. 1ed.Hauppauge. Em: . : Nova Science Publishers. 2017.v. 1, p. 145-166.
8.   Rodrigues, A. R. ; Jasinevicius, Renato G.. Mahining Scale: workpiece grain size and surface integrity in micro end milling. Em: J Paulo Davim. (Org.). Microfabrication and Precision Engineering: Research and Development. 1ed. : Woodhead Publishing. 2017.v. 1, p. 27-68.
9.   RODRIGUES, A.R.; Jasinevicius, R.G.. Machining scale. Microfabrication and Precision Engineering. 1ed.Cambridge. Em: . : Elsevier. 2017.v. 1, p. 27-68.
10.   TIBIRICA, C. B. ; RIBATSKI, G. Flow Boiling and Two-Phase Flows in Single- Microchannels and Microchanel Heat Sinks: Fundamentals, Differences and New Areas for Research. Em: John R. Thome. (Org.). Encyclopedia of Two-Phase Heat Transfer and Flow III. 1ed.Cingapura. : World Scientific Publishing. 2017.v. 2, p. 60.
11.   Varoto, Paulo S. Experimental Analysis of a Piezoelectric Energy Harvester with Internal Resonances. Conference Proceedings of the Society for Experimental Mechanics Series. 1ed. Em: . : Springer International Publishing. 2017.p. 87-97.
12.   Volpato N ; CARVALHO, J. ; Fortulan CA. Processos de AM por jateamento de material e jateamento de aglutinante. Em: André Luiz Jardini Minhoz; Carlos Alberto Costa; Carlos Henrique Ahrens; Jonas de Carvalho; Jorge Roberto Lopes dos Santos; Jorge Vicente Lopes da Silva; José Aguiomar Foggiatto; Milton Sergio Fernandes de Lima; Neri Volpato. (Org.). Manufatura aditiva Tecnologias e aplicações da impressão 3D. 1ªed.São paulo. : Edgard Blucher Ltda. 2017.v. 1, p. 181-211.

2016

1.   AMARAL, Filipe. R. ; HIMENO, F. H. T. ; PAGANI JUNIOR, C. C. ; MEDEIROS, M. A. F. ; SOUZA, D. S. ; ÁLVAREZ, D. R.. Métodos de Correlação Cruzada em Experimentos e Simulações do Ruído Acústico do Eslate. Em: Mendonça, Avelar. (Org.). Turbulência. 10ed.São José dos Campos. : ABCM. 2016.v. 2, p. 1-108.
2.   Chagas Manhães de Abreu, Gustavo Luiz ; Marques, Flávio Donizeti ; Lobato de Almeida, Fabrício César ; Paschoalini, Amarildo Tabone ; Bellucci, Felipe Silva. Electro- and Magneto-Rheological Materials. Dynamics of Smart Systems and Structures. 1ed. Em: . : Springer International Publishing. 2016.p. 189-215.
3.   De Marqui Jr., Carlos. Piezoelectric Energy Harvesting. Em: Lopes Junior, Vicente; Steffen Jr., Valder; Savi, Marcelo Amorim. (Org.). Dynamics of Smart Systems and Structures: Concepts and Applications. 1ed. : Springer International Publishing Switzerland. 2016.v. 1, p. 267-288.
4.   Fortulan CA; Paschoalino RA. Publicar: Obrigação do Pesquisador. Em: Daniel Rodrigo Leiva; Douglas Henrique Milanez; Tomaz Toshimi Ishikawa. (Org.). Ferramentas para o desenvolvimento profissional em engenharia - Volume I - Pesquisa, ciência e tecnologia. 1ªed.São Carlos. : EdUFSCar. 2016.v. 1, p. 23-38.
5.   Magazoni, F. ; Cabezas-Gómez, Luben. Numerical Methodologies for Computing Effectiveness of Crossflow Heat Exchangers with Multiple Pass and Mixture Conditions of Both Fluids. Em: James K. Cooper. (Org.). Heat Exchangers: Characteristics, Types and Emerging Applications. 1ed.Hauppauge, New York. : Nova Science Publishers. 2016.p. 204.
6.   NEUNERT, M. ; BOAVENTURA, T. ; BUCHLI, J.. WHY OFF-THE-SHELF PHYSICS SIMULATORS FAIL IN EVALUATING FEEDBACK CONTROLLER PERFORMANCE - A CASE STUDY FOR QUADRUPEDAL ROBOTS. Advances in Cooperative Robotics. 1ed. Em: . : WORLD SCIENTIFIC. 2016.p. 464-472.
7.   Ruiz, A. G. ; FONTES, J. V. C. ; de Oliveira, Leopoldo P.R. ; Coelho, R. T. ; da Silva, M.M.. Efficient Kinematic architectures for parallel manipulators. Em: Wim Desmet, Bert Pluymers, Simona Moschini. (Org.). EMVeM - Energy efficiency management for vehicles and machines. 1ed.Leuven. : KU leuven. 2016.v. 1, p. 85-98.
8.   Semini, Claudio ; Barasuol, Victor ; Boaventura, Thiago ; Frigerio, Marco ; Buchli, Jonas. Is Active Impedance the Key to a Breakthrough for Legged Robots?. Springer Tracts in Advanced Robotics. 1ed. Em: . : Springer International Publishing. 2016.v. 114, p. 3-19.
9.   Tita, Volnei. Composite Structures Design and Analysis. Dynamics of Smart Systems and Structures. 1ed. Em: . : Springer International Publishing. 2016.p. 217-263.
10.   TRINDADE, M.A. Passive and Active Structural Vibration Control. Em: Vicente Lopes Jr; Valder Steffen Jr; Marcelo Amorim Savi. (Org.). Dynamics of Smart Systems and Structures: Concepts and Applications. 1ed. : Springer. 2016.p. 1-28.
11.   TRINDADE, M.A. Piezoelectric Structural Vibration Control. Em: Vicente Lopes Jr; Valder Steffen Jr; Marcelo Amorim Savi. (Org.). Dynamics of Smart Systems and Structures: Concepts and Applications. 1ed. : Springer. 2016.p. 1-21.
12.   VENTURA, C. E. H.; DENKENA, B. ; GROVE, T. ; WOIWODE, S. ; BEHRENS, L.. Schleifen von Schneidkantenverrundungen an PCBN-Wendeschneidplattten. Em: Hans-Werner Hoffmeister; Berend Denkena. (Org.). Jahrbuch Schleifen, Honen, Läppen und Polieren - Verfahren und Maschinen. 67ed.Essen. : Vulkan-Verlag GmbH. 2016.p. 91-101.

2015

1.   BUZOLIN, R. H. ; TOLNAI, D. ; MENDIS, C. L. ; STARK, A. ; SCHELL, N. ; Pinto, H. ; Kainer, K. U. ; HORT, N.. Investigation of Compression Behavior of Mg-4Zn-2(Nd,Gd)-0.5Zr at 350°C by In Situ Synchrotron Radiation Diffraction. Magnesium Technology 2015. xxed.Hoboken, NJ, USA. Em: . : John Wiley & Sons. 2015.p. 103-107.
2.   CHIARELLI, L. R. ; SILVEIRA, Z. C.. Numerical analysis of static and dynamic stiffness of an experimental set-up to investigation of design aerostatic ceramic porous bearings. Em: Pennacchi, P.. (Org.). Serie Mechanims and Machine sciences. 1ed. : Springer International Switzerland. ISBN 978-3-319-06589-2.. 2015.v. 21, p. 99.
3.   Liu, Qiong ; Kazakidi, Asimina ; MEDEIROS, MARCELLO A. F. ; THEOFILIS, VASSILIS. Numerical Simulation of a Synthetic Jet with OpenFOAM. Fluid Mechanics and Its Applications. 1ed. Em: . : Springer International Publishing. 2015.p. 197-202.
4.   RIBATSKI, Gherhardt; Da Silva, J. D.. Condensation in Micro-Channels. Em: Sujoy Saha. (Org.). Microchannel Phase Change Transport Phenomena. 1ed. : Elsevier. 2015.v. 1, p. 287-324.
5.   RIBATSKI, Gherhardt; KANIZAWA, F. T.. Heat Transfer Enhancement Techniques Applied to Evaporation Process. Em: John R. Thome, Jungho Kim. (Org.). Heat Transfer Enhancement Techniques Applied to Evaporation Process. 1ed. 2015.v. 2, p. 1.
6.   Souza, Daniel S. ; RODRÍGUEZ, DANIEL ; de Medeiros, Marcello A. F.. Proper Orthogonal Decomposition Analysis of Noise Generation Mechanisms in the Slat Cove. Fluid Mechanics and Its Applications. 1ed. Em: . : Springer International Publishing. 2015.v. 107, p. 237-242.
7.   Varoto, Paulo S. Issues in Experimental Testing of Piezoelectric Energy Harvesters. Conference Proceedings of the Society for Experimental Mechanics Series. 1ed. Em: . : Springer International Publishing. 2015.v. 9, p. 11-17.
8.   VIEIRA, A.C. ; GUEDES, R. M. ; TITA, V.. Constitutive modeling and mechanical behavior prediction of biodegradable polymers during degradation. Em: Chih-Chang Chu. (Org.). Biodegradable Polymers. Volume 1: Advancement in Biodegradation Study and Applications. 1ed.Hauppauge. : Nova Science Publishers, Inc.. 2015.v. 1, p. 15.


(*) Relatório criado com produções desde 2015 até 2025
Data de processamento: 03/04/2025 20:54:10