Menu:

Produção do Corpo Docente

Trabalhos completos publicados em anais de congressos


Número total de itens: 1152
Página: 1  2  

2016

74.   ROCHA, D. M. ; RODRIGUEZ, O. M. H.. An experimental study of upward-vertical oil-water-gas three-phase flow: flow pattern, pressure drop and volumetric phase fraction. Em: 16th Brazilian Congress of Thermal Sciences and Engineering - ENCIT 2016, 2016.
75.   RODRIGUES, D. F. ; MURAD, O. R. ; TRINDADE, MARCELO A ; de Oliveira, Leopoldo P.R.. Quantification of uncertainties in experimental modal parameters estimation: an industrial case study. Em: UNCERTAINTIES ? International Symposium on Uncertainty Quantification and Stochastic Modeling, p. 10pp, 2016.
76.   Rodrigues, G. ; SILVEIRA, Z. C.. DSM: revisão e aplicação em problemas de projeto do produto. Em: 1º SiPGEM 2016 ? Simpósio do Programa de Pós-Graduação em Engenharia Mecânica. Escola de Engenharia de São Carlos ? Universidade de São Paulo., 2016.
77.   RODRIGUES, R. ; BECKER, M.. Enhancing Vision-Based Pose Estimation for MAV Autonomous Landing. Em: 1º Simpósio de Pós-graduação em Engenharia Mecânica da EESC-USP, v. 1, p. 1-6, 2016.
78.   RODRIGUES, R. ; PEREIRA, A. R. ; HIGUTI, V. A. H. ; ARRUDA, M. A. N. C. ; Grassi Junior, V. ; Becker, Marcelo. Autonomous Mobile Robots: First Steps A mini-course on ROS for beginners on robotics track. Em: WRE 2016 - VII Workshop de Robótica Educacional, v. 1, p. 1-7, 2016.
79.   RODRIGUEZ, I. H. ; RODRIGUEZ, O. M. H.. Experimental investigation and modelling of dispersed oil-water pipe flow. Em: 9th International Conference on Multiphase Flow - ICMF 2016, 2016.
80.   Rodriguez, Oscar M. H. Preface of the ¿Symposium on Hydrodynamic Instabilities in Single and Two-phase Flow¿. Em: INTERNATIONAL CONFERENCE OF NUMERICAL ANALYSIS AND APPLIED MATHEMATICS 2015 (ICNAAM 2015), v. 1738, p. 340001, 2016.
81.   Rodriguez, Oscar M. H. Instability due to interfacial tension in parallel liquid-liquid flow. Em: INTERNATIONAL CONFERENCE OF NUMERICAL ANALYSIS AND APPLIED MATHEMATICS 2015 (ICNAAM 2015), v. 1738, p. 340002, 2016.
82.   SANTOS FILHO, E. ; NASCIMENTO, F. J. ; MOREIRA, D. C. ; RIBATSKI, G.. Wettability evaluation of superwetting surfaces coated with nanoparticles. Em: 16th Brazilian Congress of Thermal Sciences and Engineering, 2016.
83.   Santos, A.V. de F. ; SILVEIRA, Z. C.. Estudo da melhoria de um utensílio de auxílio à alimentação para portadores da Doença de Parkinson com base na integração das metodologias QFD e TRIZ. Em: Estudo da melhoria de um utensílio de auxílio à alimentação para portadores da Doença de Parkinson com base na integração das metodologias QFD e TRIZ., 2016.
84.   SANTOS, H.F.L. ; TRINDADE, M.A.. On the choice of probability density function for the stochastic bonding stiffness of piezoelectric structures. Em: 3rd International Symposium on Uncertainty Quantification and Stochastic Modeling, 2016.
85.   Santos, J. C. ; da Silva, M.M.. Dynamic Performance Enhancement and Singularities Suppression by the use of Kinematic Redundancy in Parallel Kinematic Manipulators. Em: IX Congresso Nacional de Enegnharia Mecânica - CONEM 2016, 2016.
86.   SANTOS, M. V. M. ; GARCIA, J. D. A. ; FERREIRA, G. F. O. ; RIBEIRO, M. L.. CARBON - FIBRE/EPOXI LAMINATED PLATE: EVALUATION OF RESIDUAL FLEXURAL PROPERTIES AFTER DELAMINATION FAILURE. Em: 1º Simpósio de Pós Graduação em Engenharia Mecânica, 2016.
87.   SANTOS, W. M. ; OLIVEIRA, G. C. ; SIQUEIRA, A. A. G. ; SIQUEIRA, A. A. G.. Desenvolvimento de um Exoesqueleto Modular para Membros Inferiores. Em: Congresso Brasilerio de Automática, v. 1, p. 1-6, 2016.
88.   SARTORATO, M. ; TALREJA, R. ; TITA, V.. Prediction of intralaminar damage in composite materials under tensile loadings based on multiscale models and continuum fracture mechanics. Em: I Simpósio do Programa de Pós-Graduação em Engenharia Mecânica da EESC-USP, 2016.
89.   SATO, E. S. ; COSTA, R. R. C. ; MEDEIROS, R. ; RIBEIRO, M. L. ; TITA, V.. Fabricação e ensaios experimentais de um novo biocompósito para aplicação em estruturas aeronáuticas de interiores. Em: I Simpósio do Programa de Pós-Graduação em Engenharia Mecânica da EESC-USP, 2016.
90.   SENNI, A. P. ; TRONCO, M. L.. Projeto de Hardware dedicado para o processamento de imagens em aplicações de navegação autônoma de robôs móveis agrícolas. Em: CONEM 2016 - IX Congresso Nacional de Engenharia Mecânica, 2016.
91.   SHIMIZU, G. K. K. ; TIBIRIÇÁ, C. B.. Experimental measurement of adiabatic capillary tube performance on a vapor compression refrigeration cycle. Em: ENCIT, 2016.
92.   SILVA, TARCISIO M. ; TAN, D. ; De Marqui Jr, C ; Erturk, A. Suppression of Nonlinear Bifurcations in Flexible Structures Using Nonlinear Switching Shunt Damping Circuits. Em: ASME International Design Engineering Technical Conference and the Computer and Information in Engineering Conference (IDETC/CIE), 2016.
93.   SILVA, TARCISIO M. ; TAN, D. ; De Marqui Jr., Carlos ; Erturk, A. Nonlinear Switching Circuits Integrated to a Structurally Nonlinear Broadband Energy Harvester. Em: 23rd SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, 2016.
94.   SILVEIRA, Z. C.; SANTOS, L. E. F.. Modelo computacional para identificação de parâmetros estruturais de uma plataforma destinada à pesquisa em manufatura aditiva. Em: 1º SiPGEM 2016 ? Simpósio do Programa de Pós-Graduação em Engenharia Mecânica. Escola de Engenharia de São Carlos ? Universidade de São Paulo., 2016.
95.   SIQUEIRA, A. A. G.; SIQUEIRA, A. A. G. ; SANTOS, W. M.. Optimal Impedance Control for Robot-Aided Rehabilitation of Walking Based on Estimation of Patient Behavior. Em: 6th IEEE RAS/EMBS International Conference on Biomedical Robotics and Biomechatronics - BioRob 2016, 2016.
96.   Sousa, V C ; De Marqui Jr., Carlos ; ELAHINIA, M. H.. Effects of geometric nonlinearities of shape memory alloy springs on the aeroelastic behavior of a typical aeroelastic section. Em: 23rd SPIE Annual International Symposium on Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, 2016.
97.   SOUZA, A. M. ; Silva, E.J.. Retificação de Superligas com Rebolos de Alto Rendimento: Avaliação do Desempenho. Em: XX Colóquio de Usinagem, p. 1-1, 2016.
98.   SOUZA, D. S. ; RODRÍGUEZ, D. ; MEDEIROS, MARCELLO A. F.. LARGE SCALE STRUCTURES AND NOISE GENERATION IN LEADING EDGE SLAT OF HIGH LIFT AIRFOILS. Em: Escola de Primavera de Transição e Turbulência, 2016.
99.   SOUZA, L. F. S. ; MEDEIROS, R. ; TITA, V.. Analise dinâmica de sensibilidade aplicada a placas de material compósito laminado. Em: I Simpósio de Métodos Numéricos em Engenharia, 2016.
100.   SPADA, R. P. ; Nicoletti, R.. Vibration Control of a Rotor by Active Hybrid Bearing and the Udwadia-Kalaba Methodology. Em: ISMA 2016 - International Conference on Noise and Vibration Engineering, v. 1, p. 953-960, 2016.
101.   SUETH JR., I. L. S. ; TIBIRIÇÁ, C. B.. Review of micro-heat pipes: a concept of an efficient cooling method. Em: 16th Brazilian Congress of Thermal Sciences and Engineering, 2016.
102.   TAGUTI, M. V. H. ; SATO, E. S. ; COSTA, R.R.C. ; DOMICIANO, S. M. ; VIEIRA, A.C. ; TITA, V.. Tensile, compression and flexural tests on castor oil polyurethane reinforced with calcium carbonate. Em: III Brazilian Conference on Composite Materials, 2016.
103.   TINELLI, L. M. ; BECKER, M.. Logística Aplicada para Projeto e Simulação de Armazéns Inteligentes. Em: 1º Simpósio de Pós-graduação em Engenharia Mecânica da EESC-USP, v. 1, p. 1-6, 2016.
104.   TONATTO, M. L. P. ; FORTE, M. M. C. ; TITA, V. ; AMICO, S. C.. Progressive fatigue damage modeling of composite curved structures used in offloading hoses. Em: 17th European Conference on Composite Materials, 2016.
105.   TONATTO, M. L. P. ; FORTE, M. M. C. ; TITA, V. ; AMICO, S. C.. Progressive damage modeling of curved composite structures for offloading hoses. Em: III Brazilian Conference on Composite Materials, 2016.
106.   V D Tavernari ; CATALANO, F. M.. LOW REYNOLDS PROPELLER META-MODEL FOR MULTIDICIPLYNARY OPTIMIZATION. Em: CONGRESS OF THE INTERNATIONAL COUNCIL OF THE AERONAUTICAL SCIENCES ICAS 2016, 2016.
107.   VELASCO-PENA, H. F. ; RIANO, A. B. ; CARVALHO, C. H. M. ; ESTEVAM, Valdir ; RODRIGUEZ, O. M. H.. Wire-mesh-based tomography in upward-vertical oil-water-air three-phase flow. Em: 9th International Conference on Multiphase Flow - ICMF 2016, 2016.
108.   VELASQUEZ, A. E. B. ; HIGUTI, V. A. H. ; GUERRERO, H. B. ; Becker, Marcelo. Helvis - a Small-scale Agricultural Mobile Robot Prototype for Precision Agriculture. Em: 13th International Conference on Precision Agriculture, v. 1, p. 1-18, 2016.
109.   Venter, G. S. ; Silva, L. M. P. ; da Silva, M.M.. INCREASING THE STABILITY LIMIT IN CHATTER THROUGH ACTIVE DAMPING. Em: 1º Simpósio do Programa de Pós-Graduação em Engenharia Mecânica (SiPGEM), 2016.

2015

1.   ALMEIDA JR., J. H. S. ; RIBEIRO, M. L. ; TITA, V. ; FARIA, H. ; MARQUES, A. T. ; AMICO, S. C.. PROGRESSIVE FAILURE ANALYSIS OF FILAMENT WOUND COMPOSITE TUBES UNDER INTERNAL PRESSURE. Em: Proceedings of 20th ICCM, 2015.
2.   ALMEIDA JR., J. H. S. ; RIBEIRO, M. L. ; TITA, V. ; AMICO, S. C.. Influence of stacking sequence on the radial compression behavior of filament wound composite tubes. Em: Meeting on Aeronautical Composite Materials and Structures, 2015.
3.   ALMEIDA JR., J. H. S. ; RIBEIRO, M. L. ; TITA, V. ; FARIA, H. ; MARQUES, A. T. ; AMICO, S. C.. Buckling and post-buckling in filament wound composite tubes under transverse compression. Em: 20th International Conference on Composite Materials, 2015.
4.   ALMEIDA JR., J. H. S. ; RIBEIRO, M.L. ; TITA, V. ; FARIA, H. ; MARQUES, A. T. ; AMICO, S. C.. Progressive failure analysis of filament wound composite tubes under biaxial loading. Em: 20th International Conference on Composite Materials, 2015.
5.   ALVAREZ, R. P. ; KANIZAWA, F. ; G. Ribatski ; de Oliveira, Leopoldo P.R.. An experimental study on the vibration induced by a two-phase air-water crossflow in a normal triangular tube bundle. Em: COBEM 2015 - 23rd ABCM International Congress of Mechanical Engineering, p. 8pp, 2015.
6.   ALVAREZ, R. P. ; KANIZAWA, F. ; G. Ribatski ; de Oliveira, Leopoldo P.R.. An experimental study on the characteristics of a dynamic structure for the study of multiphase flow induced vibrations in tube bundles. Em: XVII DINAME, p. 1-14, 2015.
7.   ALVES, G. C. ; Silva, E.J.. Fluidos de corte criogênicos aplicados ao torneamento: um estudo do estado da arte. Em: 8º Congresso Brasileiro de Engenharia de Fabricação - COBEF2015, v. 1, p. 1-8, 2015.
8.   AMARAL, FILIPE R. ; Souza, Daniel S. ; PAGANI, CARLOS C. ; MEDEIROS, MARCELLO. Experimental study of the effect of a small 2D excrescence placed on the slat cove surface of an airfoil on its acoustic noise. Em: 21st AIAA/CEAS Aeroacoustics Conference, 2015.
9.   ANDRÉS GÓMEZ RUIZ ; JOÃO VITOR DE CARVALHO FONTES ; MAÍRA MARTINS DA SILVA. Energy Consumption of Redundant Planar Parallel Manipulators: a Comprehensive Study. Em: 23rd ABCM International Congress of Mechanical Engineering, 2015.
10.   Araujo, L.A.O. ; ROLLO, J. M. A. ; Jasinevicius, R G ; FORTULAN, Carlos Alberto. Estudo comparativo do corte abrasivo de materiais frágeis: quartzo sintético plano x, silício 111 e alumina 99,8%. Em: 59o. Congresso Brasileiro de Cerâmica, 2015.
11.   ASSIS, C.L.F. ; JASINEVICIUS, R.G. ; Rodrigues, A. R. ; COELHO, Reginaldo Teixeira. Microfresamento de canais em aços com grãos ultrafinos. Em: 8º Congresso Brasileiro de Engenharia de Fabricação, 2015.
12.   BERETTA, L. L. ; MOREIRA, D. C. ; SPHAIER, L. A. ; NUNES, L. C. S.. Influence of experimental configuration on the estimation of the Biot number in a simple setup designed to estimate the thermal conductivity of solid materials. Em: 23rd International Congress of Mechanical Engineering, 2015.
13.   BOCCI, E. D. ; AROCA, R. V. ; BIDINOTTO, J. H.. Projeto, implementação e validação de um sistema de sensoriamento para veículos do tipo Baja SAE. Em: 67ª Reunião Anual da SBPC, 2015.
14.   BOTTENE, A. C. ; ATOATTE, A. ; Silva, E.J. ; Oliveira, J F G ; MARCOS, GUSTAVO P.. Engenharia de Superfícies por Retificação ? Uma Aplicação para Manufatura de Virabrequins. Em: XXIII Simpósio Internacional de Engenharia Automotiva - SIMEA 2015, v. 1, p. 1-10, 2015.
15.   BOTTENE, ALEX CAMILLI ; ATOATTE, ALMIR ; Silva, E.J. ; OLIVEIRA, J. F. G. ; MARCOS, GUSTAVO POLLETTINI. Functionalization of surfaces via grinding process ? an application for crankshaft manufacturing. Em: SIMPÓSIO INTERNACIONAL DE ENGENHARIA AUTOMOTIVA - SIMEA, 2015.
16.   BRICENO, R. P. A. ; KANIZAWA, F. T. ; RIBATSKI, G ; De Oliveira, L.P.R.. An experimental analysis on the characteristics of a dynamic structure for the study of multiphase flow-induced vibrations in tube bundles. Em: XVII International Symposium on Dynamic Problems of Mechanics, 2015.
17.   CALIRI JR, M. F. ; FERREIRA, A. J. M. ; TITA, V.. The use of Legendre polynomials on composite plate theories. Em: Meeting on Aeronautical Composite Materials and Structures, 2015.
18.   CAMARGO, L. G. ; SOUZA, A. F. ; PODDA, L. ; SCHAPPO, F. ; RODRIGUES, A. R.. Influência das trajetórias de usinagem e da tolerância de cálculo no tempo real de fresamento de formas complexas. Em: 8 Congresso Brasileiro de Engenharia de Fabricação, 2015.
19.   Cesar R ; Boffa RS ; Leiva TP ; Pereira CA ; Guarnieiro R ; Fortulan CA ; Rollo JMDA. Classificação de ossos trabeculares normais, soteopênicos e osteoporóticos de vértebras humanas pela ultrassonometria óssea de calcãneo e correlação com ensaio de compressão axial. Em: 4ª Edição do workshop de Biomateriais, 2015.
20.   CHAVES, C. S. ; VIDAL, L. E. O. ; BARBOSA, M. C. ; RODRIGUEZ, O. M. H.. FRICTIONAL PRESSURE-DROP PREDICTION IN BUBBLY FLOW IN AN ANNULAR-DUCT USING DRIFT-FLUX MODEL. Em: IV Journeys in Multiphase Flows - JEM 2015, 2015.
21.   CM, R. ; LB, A. ; JH, R. ; LISBOA-FILHO, PAULO NORONHA ; Borges, AFS ; Fortulan CA. Propriedades físico-mecânicas de cimento resinoso autoadesivo aditivado com nanotubos de TiO2. Em: 51º Encontro Brasileiro de Materiais Dentários, 2015.
22.   COLMANETTI, A. R. A. ; RODRIGUEZ, O. M. H. ; CASTRO, M. S. ; KJELDBY, T. K. ; DERKS, P. W. J.. EXPERIMENTAL STUDY OF TWO-PHASE FLOW IN LARGE-DIAMETER ANNULAR DUCTS. Em: 23rd ABCM International Congress of Mechanical Engineering - COBEM 2015, 2015.
23.   CONSONI, L. J. ; SANTOS, W. M. ; SIQUEIRA, A. A. G. ; SIQUEIRA, A. A. G.. A Distributed Game System for Robotic Telerehabilitation. Em: International Congress of Mechanical Engineering - COBEM, 2015.
24.   CONSONI, L. J. ; SIQUEIRA, A. A. G. ; SIQUEIRA, A. A. G.. Jogos Computacionais para Reabilitação Robótica. Em: Encontro Nacional de Engenharia Biomecânica, v. 1, p. 1, 2015.
25.   COSTA, R. R. C. ; ELOY, F. S. ; MEDEIROS, R. ; RIBEIRO, M. L. ; TITA, V.. Experimental dynamic investigations of bio and synthetic composites for use in aircraft interior structures. Em: Meeting on Aeronautical Composite Materials and Structures, 2015.
26.   CZELUSNIAK, L. E. ; TIBIRIÇÁ, C. B.. Critical heat flux for water flowing inside a 0.38 mm tube. Em: Multiphase Flow Journeys-JEM 2015, 2015.
27.   DIAZ, JOHN FABER ARCHILA ; PEDRAZA, INGRID LORENA ARGOTE ; GUERRA, JOSE LUIS SAAVEDRA ; MILORI, DEBORA MARCONDES BASTOS PEREIRA ; MAGALHAES, DANIEL VARELA ; Becker, Marcelo. Mirã Rover Characterization. Em: 2015 12th Latin American Robotics Symposium (LARS) and 2015 3rd Brazilian Symposium on Robotics (LARSSBR), v. 1, p. 331-10, 2015.
28.   ELOY, F. S. ; COSTA, R. R. C. ; MEDEIROS, R. ; RIBEIRO, M. L. ; TITA, V.. Comparison between mechanical properties of bio and synthetic composites for use in aircraft interior structures. Em: Meeting on Aeronautical Composite Materials and Structures, 2015.
29.   FERREIRA, G. F. O. ; MEDEIROS, R. ; OGEA, J. L. ; TITA, V.. Damage simulation in composite structures under tensile load considering friction and sliding effect. Em: International Symposium on Solid Mechanics, 2015.
30.   FERREIRA, G. F. O. ; TITA, V.. Evaluation of a material model considering a fiber progressive damage behavior. Em: Meeting on Aeronautical Composite Materials and Structures, 2015.
31.   FONTES, J. V. C. ; da Silva, M.M.. ASSESSING THE DYNAMIC PERFORMANCE OF KINEMATICALLY REDUNDANT MANIPULATORS. Em: COBEM2015 - 23rd ABCM International Congress of Mechanical Engineering, 2015.
32.   FONTES, J. V. C. ; Venter, G. S. ; da Silva, M.M.. Assessing the Actuation Redundancy Trade-off Effects on the Dynamic Performance of Planar Parallel Kinematic Machines. Em: 2015 IFToMM World Congress, 2015.
33.   GODOY, W.R.A. ; TRINDADE, M.A.. Parametric analysis of a nonlinear dynamic vibration absorber based on snap-through geometry. Em: XVII International Symposium on Dynamic Problems of Mechanics (DINAME), 2015.
34.   GONCALVES, A. ; Duduch, J.G. ; Jasinevicius, R G ; GONCALVES, D. M. ; Dib, M.H.M.. Estudo da retificação de ultraprecisão de metais duros (wc-co) para a fabricação de micromoldes. Em: 8º Congresso Brasileiro de Engenharia de Fabricação, 2015.
35.   HIGUTI, V. A. H. ; GUERRERO, H. B. ; VELASQUEZ, A. E. B. ; MOREIRA, R. ; TINELLI, L. M. ; Magalhães, D. V. ; BECKER, M.. Low-cost Embedded Computer for Mobile Robot Platform based on Raspberry Board. Em: 23rd ABCM International Congress of Mechanical Engineering, v. 1, p. 1-10, 2015.
36.   IBARRA, J. C. P. ; PENA, G. G. ; SIQUEIRA, A. A. G. ; SIQUEIRA, A. A. G.. Estimation of patient participation during therapeutic movements using the Anklebot: technique and preliminary results. Em: LARS 2015 ? 12th Latin American Robotics Symposium, 2015.
37.   IBARRA, J. C. P. ; SIQUEIRA, A. A. G. ; SIQUEIRA, A. A. G. ; KREBS, H. I.. Assist-as-needed Ankle Rehabilitation based on Adaptive Impedance Control. Em: 2015 IEEE 11th International Conference on Rehabilitation Robotics (ICORR), v. 1, p. 1-6, 2015.
38.   IBARRA, J. C. P. ; SIQUEIRA, A. A. G. ; SIQUEIRA, A. A. G. ; SANTOS, W. M.. Controle Adaptativo de um Robô para a Reabilitação do Tornozelo. Em: Encontro Nacional de Engenharia Biomecânica, v. 1, p. 1, 2015.
39.   IGNACIO, I. ; Cardoso, E.M. ; GASCHE, J. L. ; RIBATSKI, Gherhardt. A State-of-the-art Review on Pool Boiling on Nanostructure Surfaces. Em: 12th International Conference on Nanochannels, 2015.
40.   JAUREGUI, B. S. ; PENA, G. G. ; SANTOS, W. M. ; SIQUEIRA, A. A. G. ; SIQUEIRA, A. A. G.. An Optimized EMG-Driven Model for Patient Torque Estimation Applied to Rehabilitation Robotics. Em: International Congress of Mechanical Engineering - COBEM, 2015.
41.   Justino Neto, J. M. ; SILVEIRA, Z. C.. Método de avaliação de variantes de solução aplicado a uma impressora 3-D portátil, baseada em tecnologia LOM. Em: Anais do 10º Congresso Brasileiro de Gestão de Inovação e Desenvolvimento de Produtos, 2015.
42.   KANIZAWA, F. T. ; RIBATSKI, G. Two-phase flow patterns during air-water upward flow across tube bundle. Em: 3rd Multiphase Flow Journey, 2015.
43.   Leal, C. A. A. ; Abrão, A.M. ; Brandão, L. C. ; VENTURA, C. E. H. ; DENKENA, B. ; BREIDENSTEIN, B. ; Bergmann, B.. Experimental study on turning of gray cast iron using texturized tungsten carbide inserts. Em: 23rd ABCM International Congress of Mechanical Engineering, 2015.
44.   LOPES JUNIOR, G. B. ; BOCK, E.G.P. ; Cabezas-Gómez, Luben. Análise numérica de escoamentos com baixos números de Reynolds para dispositivos de assistência ventricular. Em: ENEBI 2015 - Encontro Nacional de Engenharia Biomecânica, 2015.
45.   LOPEZ-SALAS, C. N. ; GOMEZ-RIVERA, W. ; CERÓN-MUÑOZ, H. D.. ANÁLISIS COMPUTACIONAL DE LA INFLUENCIA DE LA SUCCIÓN DE CAPA LÍMITE SOBRE EL COMPORTAMIENTO AERODINÁMICO DE GENERADORES DE VÓRTICE FIJOS EN PERFIL NREL-S809. Em: 12º CONGRESO IBEROAMERICANO DE INGENIERÍA MECANICA, 2015.
46.   M. F. Milani ; TIBIRIÇÁ, C. B.. Optimization of critical heat flux prediction methods for micro-scale flow boiling. Em: Multiphase Flow Journeys-JEM 2015, 2015.
47.   MACHADO, M. V. T. ; DUARTE, H. P. ; SILVA, V. E. P. ; Sabariz, A. L. R. ; Pinto, H.. MICROSTRUCTURAL AND MECHANICAL CHARACTERIZATION OF THE THIXOCASTED ZK60-T6 MAGNESIUM ALLOY WITH RARE EARTH ELEMENTS. Em: 23rd ABCM International Congresso of Mechanical Engineering - COBEM 2015, 2015.
48.   Marques, F. D.; FURLAN, L. B. ; VASCONCELLOS, Rui Marcos Gromboni de. Nonlinear Aeroelastic Behavior of Airfoil Under the Effects of Stall-Induced Vibration at Low Mach Number. Em: International Conference on Structural Engineering Dynamics - ICEDyn 2015, 2015.
49.   Marques, F. D.; PEREIRA, D. A. ; VASCONCELLOS, Rui Marcos Gromboni de. Nonlinear airfoil torsional response induced by separated flows. Em: 56th AIAA/ASME/ASCE/AHS/ASC Structures, 2015.
50.   MATHIAS, MARLON S. ; GENNARO, ELMER M. ; MEDEIROS, MARCELLO A. F.. Aeroacústica de emparelhamento de vórtices em esteiras assimétricas. Em: XXXV CNMAC Congresso Nacional de Matemática Aplicada e Computacional, 2015.
51.   Mattazio, R.R. ; Noritomi, P. Y. ; SILVEIRA, Z. C.. Implementação de um modelo mecabiológico para avaliação de rigidez estrutural de tecido ósseo cortical. Em: 5º. do Encontro Nacional de Engenharia Biomecânica. ENEBI 2015., 2015.
52.   MEDEIROS, R. ; DANIEL, G. S. ; RIBEIRO, M. L. ; TITA, V.. Computational tool for fatigue analysis in composite material. Em: 23rd ABCM International Congress of Mechanical Engineering, 2015.
53.   MEDEIROS, R. ; LOPES, H. M. R. ; GUEDES, R. M. ; VAZ, M. A. P. ; VANDEPITTE, D. ; TITA, V.. A new approach for shm system: combination of vibration based method and shearography speckle. Em: International Symposium on Solid Mechanics, 2015.
54.   MEDEIROS, R. ; SARTORATO, M. ; TITA, S. P. S. ; VANDEPITTE, D. ; RIBEIRO, M. L. ; TITA, V.. Residual strength criterion based on damage metric and flexural after impact (FAI) test for composite materials. Em: 23rd ABCM International Congress of Mechanical Engineering, 2015.
55.   MEDEIROS, R. ; TITA, S. P. S. ; VANDEPITTE, D. ; TITA, V.. Residual flexural strength criterion for composite plates subjected to low velocity impact. Em: Meeting on Aeronautical Composite Materials and Structures, 2015.
56.   MEDEIROS, R. ; TITA, S. P. S. ; VANDEPITTE, D. ; TITA, V.. A new Structural Health Monitoring system for composite materials based on the combination of different methods. Em: Meeting on Aeronautical Composite Materials and Structures, 2015.
57.   MIRANDA, A. B. W. ; COELHO, T. A. H. ; SIQUEIRA, A. A. G. ; SIQUEIRA, A. A. G. ; CORDERO, A. F.. Directional stiffness attachment design for an upper limb exoskeleton. Em: 2015 IEEE 11th International Conference on Rehabilitation Robotics (ICORR), v. 1, p. 1-6, 2015.
58.   MITSCHKA, C. M. ; TERRA, Marco Henrique ; SIQUEIRA, A. A. G. ; SIQUEIRA, A. A. G.. Single and Double Inverted Pendulum as Subject to a Markovian Controller. Em: 54th Conference on Decision and Control, v. 1, 2015.
59.   MITSCHKA, C. M. ; TERRA, Marco Henrique ; SIQUEIRA, A. A. G. ; SIQUEIRA, A. A. G.. Derivation of a Markovian Controller for an Exoskeleton by overcome the Benchmark of a Double Inverted pendulum. Em: Simpósio Brasileiro de Automação Inteligente (SBAI), v. 1, 2015.
60.   MOORE, E. R. ; VALDES, G. ; ESPINOZA, C. ; COELHO, R. S. ; Pinto, H. ; GARCIA, J.. ANALYSIS OF THERMAL STRESSES IN K-Al2O3 /Ti(C,N) COATINGS DEPOSITED ON CUTTING TOOLS. Em: 8th Brazilian Congress of Manufacturing Engineering - COBEF 2015, 2015.
61.   MOREIRA, R. ; VELASQUEZ, A. E. B. ; GUERRERO, H. B. ; HIGUTI, V. A. H. ; Magalhães, D. V. ; PORTO, A. J. V. ; BECKER, M. ; AROCA, R. V.. Orientation (Yaw) Fuzzy Controller applied to a Differential Drive Mobile Robot Prototype for Indoor and Outdoor Applications. Em: 23rd ABCM International Congress of Mechanical Engineering, v. 1, p. 1-10, 2015.
62.   MOREIRA, T. ; NASCIMENTO, Francisco Julio Do ; RIBATSKI, Gherhardt. Flow boiling of nanofluids of water and AL2O3 inside a 1.1 mm round channel. Em: 9th International Conference on Boiling and Condensation Heat Transfer Boiling & Condensation, 2015.
63.   MOREIRA, T. ; NASCIMENTO, Francisco Julio Do ; RIBATSKI, Gherhardt. Flow boiling heat transfer of coefficient of DI-water/SIO2 nanofluid inside a 1.1 mm round microchannel. Em: 13th International Conference on Nanochannels, 2015.
64.   MOSQUERA-SÁNCHEZ, JAIME A. ; Janssens, K. ; Desmet, W. ; de Oliveira, Leopoldo P.R.. Towards Sound Quality Metrics Balance on Hybrid Powertrains. Em: ICEDyn 2015, p. 1-8, 2015.
65.   MOSQUERA-SÁNCHEZ, JAIME A.; DESMET, W. ; JANSSENS, K. ; OLIVEIRA, L. P. R.. Multichannel Active Sound Quality Control for Independent-Channel Sound Profiling. Em: EURONOISE 2015, p. 2177 - 2182, 2015.
66.   MOSQUERA-SÁNCHEZ, JAIME A.; DESMET, W. ; JANSSENS, K. ; OLIVEIRA, L. P. R.. Towards SQ Metrics Balance on Hybrid Powertrains. Em: ICEDyn 2015, p. 1-8, 2015.
67.   NASCIMENTO, I. H. D. ; FONSECA, A. F. F. ; BAKKENIST, H. ; FAVORETTO, B. ; MATHIAS, M. S. ; RIBEIRO, M. V. F. ; RIBEIRO, M. L. ; GRECO JR, P. C.. PVC Tube Bearing Tests for a Lab Scale Rocket Fuselage Design. Em: 23rd ABCM International Congress of Mechanical Engineering, 2015.
68.   NOGUEIRA, S. ; INOUE, ROBERTO S. ; TERRA, Marco Henrique ; SIQUEIRA, A. A. G. ; SIQUEIRA, A. A. G.. Estimation of Lower Limbs Angular Positions using Robust Kalman Filter with Sensor Variance Penalty. Em: DINCON ? Conferência Brasileira de Dinâmica, 2015.
69.   NORCINO, A. B. ; RODRIGUES, A. R. ; LIMA, A. M. A.. Formação de rebarba e rugosidade no microfresamento de aço com grãos ultrafinos. Em: 8 Congresso Brasileiro de Engenharia de Fabricação, 2015.
70.   OLIVEIRA, A. V.; MEDEIROS FILHO, D. L. ; SANTOS, R.G.. Determination of Boiling Critical Temperatures of Pure and Binary Mixtures of Water and Ethanol by Droplet Evaporation. Em: IV Journeys in Multiphase Flows (JEM2015), v. 4, p. 1-4, 2015.
71.   OLIVEIRA, F. B. ; RODRIGUES, A. R.. Formação de rebarba e energia específica de corte no microfresamento. Em: 8 Congresso Brasileiro de Engenharia de Fabricação, 2015.
72.   PAULA, N. C. G. ; PEREIRA, D. A. ; Marques, Flávio D.. On the robust control of nonlinear aeroelastic response of an airfoil. Em: 23rd ABCM International Congress of Mechanical Engineering - COBEM 2015, v. 1, p. 1-10, 2015.
73.   Pedroso MPG ; PURQUERIO, B. M. ; Fortulan CA. Fabricação de esferas cerâmicas por usinagem à verde: máquina e processo. Em: 59º Congresso Brasileiro de Cerâmica, 2015.
74.   PENA, G. G. ; JAUREGUI, B. S. ; SANTOS, W. M. ; SIQUEIRA, A. A. G. ; SIQUEIRA, A. A. G.. Adaptive Impedance Control for Rehabilitation Robotics based on an EMG-driven Muscle Force Model. Em: International Congress of Mechanical Engineering - COBEM, 2015.
75.   PEREIRA, D. A. ; Marques, F. D.. Supercritical and subcritical bifurcation in typical aeroelastic section with structural nonlinearities. Em: 23rd ABCM International Congress of Mechanical Engineering - COBEM 2015, v. 1, p. 1-10, 2015.
76.   RIANO, A. B. ; RODRIGUEZ, O. M. H.. IMPROVEMENT OF DISPERSED OIL-WATER PIPE FLOW IMAGES. Em: IV Journeys in Multiphase Flows - JEM 2015, 2015.
77.   RIANO, A. B. ; VELASCO-PENA, H. F. ; PRASSER, H. M. ; Bannwart, Antonio C. ; RODRIGUEZ, O. M. H.. Film Thickness Measurement System using FPGA Technology. Em: XX Simposio de Tratamiento de Señales, v. ID 209, 2015.
78.   RIBEIRO, G. S. ; Lopes da Silva, J.V. ; Freitas, M. S. de ; Bartolo, P.J. da S. ; Almeida, H.A. ; SILVEIRA, Z. C.. Thermal Analysis of an Extrusion System of a 3-D Bioprinter. Em: 14 th World Congress IFToMM 2015, 2015.
79.   RIBEIRO, G. S. ; SILVEIRA, Z. C.. Desenvolvimento de um modelo numérico baseado no comportamento termo elástico, de um freio a tambor utilizado em veículos leves. Em: http://portal.saebrasil.org.br/eventos/congresso/papers, p. 2015-36-0132, 2015.
80.   RIBEIRO, G. S. ; SILVEIRA, Z. C.. Structural and thermal analysis to brake disc design applied to light vehicles based on parametric sensitivity. Em: 14 th IFToMM World Congress, 2015.
81.   RODRIGUES, A. R.; RAMOS, L. W. S. L.. Usinabilidade de diferentes materiais da peça no microfresamento. Em: 8 Congresso Brasileiro de Engenharia de Fabricação, 2015.
82.   RODRIGUES, D. F. ; MURAD, O. R. ; TRINDADE, M.A. ; de Oliveira, L.P.R.. Uncertainty Quantification on a Measurement System for Experimental Modal Analysis. Em: COBEM2015 - International Congress of Mechanical Engineering, p. 1-11, 2015.
83.   RODRIGUES, K.S. ; TRINDADE, M.A.. Modeling and performance analysis of a moving base cantilever beam used in atomic force microscopes. Em: XVII International Symposium on Dynamic Problems of Mechanics (DINAME), 2015.
84.   Ruiz, A. G. ; FONTES, J. V. C. ; da Silva, M.M.. The Impact of Kinematic and Actuation Redundancy on the Energy Efficiency of Planar Parallel Kinematic Machines. Em: XVII International Symposium on Dynamic Problems of Mechanics - Diname 2015, v. 1, p. 1-10, 2015.
85.   RUIZ, ANDRÉS G. ; FONTES, JOÃO V. C. ; da Silva, MaÍra M.. The Influence of Kinematic Redundancies in the Energy Efficiency of Planar Parallel Manipulators. Em: ASME 2015 International Mechanical Engineering Congress and Exposition, p. V04AT04A010, 2015.
86.   SANTANA, H. B. ; TITA, V. ; RAMOS, R. R.. On dynamic homogenization for elastic wave propagation in a periodically imperfect connected laminated. Em: Meeting on Aeronautical Composite Materials and Structures, 2015.
87.   BRITO-SANTANA, H. ; TITA, V. ; RIBEIRO, M. L. ; RODRIGUEZ-RAMOS, R. ; BRAVO-CASTILLERO, J. ; GUINOVART-DIAZ, R.. A dispersive nonlocal model for shear wave propagation in a periodically perfect/imperfect connected multi-laminated. Em: 23rd ABCM International Congress of Mechanical Engineering, 2015.
88.   Santos, A.V.F. ; Cavalcanti, A ; SILVEIRA, Z. C.. Design process improvement of an assistive technology apparatus based on QFD and TRIZ. Em: Proceedings of the Fourteenth International Federation for the Promotion of Mechanism and Machine Science World Congress (2015 IFToMM World Congress), 2015.
89.   SANTOS, JOAO CAVALCANTI ; FREDERICE, DANIEL ; FONTES, JOAO VITOR CARVALHO ; SILVA, MAIRA MARTINS DA. Numerical Analysis and Prototyping Details of a Planar Parallel Redundant Manipulator. Em: 2015 12th Latin American Robotics Symposium (LARS) and 2015 3rd Brazilian Symposium on Robotics (LARSSBR), v. 1, p. 55, 2015.
90.   Santos, L.E.F. ; Mattazio, R.R. ; SILVEIRA, Z. C.. Avaliação analítico-numérica de fêmur humano utilizando processamento de imagem médica. Em: 5º. Encontro Nacional de Engenharia Biomecânica., 2015.
91.   SARTORATO, M. ; MEDEIROS, R. ; TITA, V. ; TALREJA, R.. A multiscale based continuum model: influence of crack sliding mode on composite materials damage evolution. Em: International Symposium on Solid Mechanics, 2015.
92.   SECCO, D. C. ; MANARELLI, F. H. ; RODRIGUES, A. R. ; MATSUMOTO, Hidekasu ; YAMAKAMI, Wyser José ; MACHADO, L. P.. Efeito dos parâmetros de corte na usinagem do aço VP100. Em: 8 Congresso Brasileiro de Engenharia de Fabricação, 2015.
93.   SEMPERTEGUI, D. ; RIBATSKI, G. Flow boiling heat transfer and two-phase pressure drop of isobutane in a 1.1 mm diameter tubes. Em: 23rd ABCM International Congress of Mechanical Engineering, 2015.
94.   SEMPERTEGUI, D. ; RIBATSKI, Gherhardt. Flow boiling heat transfer of R134a and low GWP refrigerants in a horizontal microscale channel. Em: 9th International Conference on Boiling and Condensation Heat TransferBoiling & Condensation, 2015.
95.   SEMPERTEGUI-TAPIA, D. ; RIBATSKI, G. The effect of the cross-sectional geometry on saturated flow boiling heat transfer in horizontal microscale channels. Em: 3rd Multiphase Flow Journey, 2015.
96.   Silva GS ; Fortulan CA ; MASSAROPPI JUNIOR, E.. Correção de ensaio de tração experimental através de extensômetro virtual utilizando análise por elementos finitos. Em: 13º Congresso Brasileiro de Polímeros, 2015.
97.   SILVA JUNIOR, O. M. ; FERNANDES, R. A. S. ; BIDINOTTO, J. H.. Análise Estatística de Menagens de Alerta Enviadas por Aeronaves Executivas. Em: 67ª Reunião Anual da SBPC, 2015.
98.   Silva, E.J.; BOTTENE, A. C. ; SIMON, A. ; KIRSCH, B. ; AURICH, J.C.. New advances in texturing by grinding. Em: 23nd International Congress of Mechanical Engineering - COBEM 2015, p. 1-10, 2015.
99.   SOUZA, D. M. ; Pinto, H. ; SANTOS, J. ; COELHO, R. S.. ESTUDO DAS PROPRIEDADES MECÂNICAS, MICROESTRUTURAIS E TENSÕES RESIDUAIS DA LIGA DE ALUMÍNIO AA 5083-H111 SOLDADAS POR FRICTION STIR WELDING - FSW. Em: 8th Brazilian Congress of Manufacturing Engineering - COBEF 2015, 2015.
100.   Souza, M.C. ; SILVEIRA, Z. C.. Análise termo estrutural de um freio a disco aplicado a veículos leves. Em: 24º. Congresso e Mostra Internacional SAE Brasil de tecnologia da mobilidade., 2015.
101.   TIBIRIÇÁ, C. B. Critical heat flux enhancement by control of inlet vapor quality in a microscale channel. Em: 9th International Conference on Boiling and Condensation Heat Transfer, 2015.
102.   TONATTO, M. L. P. ; TELES, R. A. ; AMICO, S. C. ; TITA, V.. Analysis of carbon fiber composite coil/rings for offloading hoses under crushing load via computational model. Em: 20th International Conference on Composite Materials, 2015.
103.   TORRES, C. ; ARCHILA, J. F. ; TRONCO, M. L. ; BECKER, M.. MODELAGEM E IMPLEMENTAÇÃO DE UM SISTEMA FLEXÍVEL DE MANUFATURA. Em: CIMM 2015 SÉPTIMO CONGRESO INTERNACIONAL DE INGENIERÍA MECÁNICA, 2015.
104.   TRINDADE, M.A. Recent advances on finite element characterization of piezoelectric macro-fibre composites. Em: Meeting on Aeronautical Composite Materials and Structures (MACMS), 2015.
105.   TRONCO, M. L.; LULIO, LUCIANO C. ; OLIVEIRA, C. ; PORTO, ARTHUR J. V.. ANN Pattern recognition Techniques and Virtual Environments-Based for Image Processing in Mobile Robot Navigation. Em: XII SBAI - Simpósio Brasileiro de Automação Inteligente, p. 1518-1523, 2015.
106.   VELASQUEZ, J.Q. ; TRINDADE, M.A.. Effect of adhesive layer properties on the performance of surface-mounted piezoelectric sensors and actuators. Em: Meeting on Aeronautical Composite Materials and Structures (MACMS), 2015.
107.   Venter, G. S. ; da Silva, M.M.. Comparative studies on chatter in turning considering nonlinearities, mode coupling and regenerative effects. Em: XVII International Symposium on Dynamic Problems of Mechanics - Diname 2015, v. 1, p. 1-10, 2015.
108.   Venter, G. S. ; da Silva, M.M.. Numerical Models on nonlinear Dynamic behavior of Chatter in turning and boring Processes. Em: ICEDyn 2015 - Int. Conf on Structural En. Dynamics, 2015.
109.   Venter, G. S. ; da Silva, M.M.. Reducing chatter in turning using a piezoelectric LR passive shunt strategy. Em: COBEM2015 - 23rd ABCM International Congress of Mechanical Engineering - COBEM 2015, 2015.
110.   Venter, G. S. ; FONTES, J. V. C. ; da Silva, M.M.. The Impact of Added Regenerative Effect on Nonlinear Chatter Studies. Em: 2015 IFToMM World Congress, 2015.
111.   VENTURA, C. E. H.; DENKENA, B.. Preparação de arestas de ferramentas de cerâmica mista por retificação e sua aplicação no torneamento de aço endurecido. Em: 8º Congresso Brasileiro de Engenharia de Fabricação, 2015.
112.   VIEIRA, A. F. C. ; COSTA, R. R. C. ; RIBEIRO, M. L. ; TITA, V.. Loading rate effect on the tensile properties of glass fiber reinforced castor oil polyurethane and epoxy resins. Em: Meeting on Aeronautical Composite Materials and Structures, 2015.
113.   VIEIRA, A.C. ; GUEDES, R. M. ; TITA, V.. Simulação computacional do dano induzido por hidrólise em polímeros biodegradáveis para reparação de tecidos ligamentosos. Em: VI Congresso Nacional de Biomecânica, 2015.
114.   VIVEROS, H. P. ; Nicoletti, R.. Active Hybrid Bearing Using Neural Network Applied Model Predictive Control. Em: COBEM 2015 - 23rd International Congress of Mechanical Engineering, v. 1, p. 1-10, 2015.
115.   WATANABE, F. Y. ; MALAVOLTA, A. T. ; PAZIANI, F. T. ; BIDINOTTO, J. H. ; AVILA, M. T.. Os Programas de Competições Estudantis como Instrumento de Integração entre Ensino, Pesquisa e Extensão. Em: 2º Congresso de Extensão da Associação das Universidades do Grupo de Montevideo (AUGM), 2015.
116.   ZAKARIA, M. Y. ; PEREIRA, D. A. ; RAGAB, S. A. ; Marques, F. D.. An Experimental Study of Added Mass on a Plunging Airfoil Oscillating with High Frequencies at High Angles of Attack. Em: 33rd AIAA Applied Aerodynamics Conference, v. 1, p. 1-10, 2015.


(*) Relatório criado com produções desde 2015 até 2025
Data de processamento: 03/04/2025 20:54:10